Single Phase Digital Starter & Panel (GDSP+LLC)

GDSP+LLC

GLECS provides micro controller based digital starters for single phase submersible pumps.

GLECS single phase submersible micro controller based digital starter provide protection against over load, lowhigh voltage, dry-run with run and cyclic timer. It also cut-off start capacitor after prefixed time.

GLECS single phase pump digital starters are available GDSP+LLC & GDSP+T models depending on protections required. It operates on wide voltage range from 140-280 volts without chattering. Single phase motors are widely accepted in irrigation and water supply system.

Technical Specification
Supply Voltage	230 V +/- 20 V, 50 Hz
Current Range	3-25 Amp.
Dry Run	1-22 Amp.
Overload Tripping	As per inverse time current characteristic
Low/High Voltage Cut-Off	140 V – 280 V
Low/High Voltage Cut-in	150 V – 270 V
On-Off / Reset	By manual push button & auto start
Indication (GDMS+LLC)	UH, UL for under ground tank OH, OL for overhead tank
Display	Voltage, Ampere & Fault
Colour	White & Kangaroo blue
Enclosure	Mild steel powder coated
Dimension	305 x 245 x 90 mm. (Approx.)
Weight	3.500 Kg. (Approx)

In all models, various combinations of starting and running capacitors are provided having following values
Starting Capacitors	80/100,100/120, 120/150, 150/200,200/250, uF, 230 V
Running Capacitors:	25, 36, 45, 50, 72 uF, 440V

Model	Features
GDSP +LLC	Digital Volt-Ampere meter, high-low voltage cut-off, over load and dry run protection. with auto restart time delay. 1 NO start – run contacter. Inbuilt water level controller for under ground & overhead tanks.
GDSP +T	Digital Volt-Ampere meter, high-low voltage cut-off, over load and dry – run protection with auto restart time delay. 1 NO start – run contacter. Inbuilt on-of cyclic timer.

Specifications are subject to change without any prior notice due to our continuous development, improvement and adaptation to customers requirement.